AN ANALYSIS OF ELECTROLYTIC IN-PROCESS DRESSING (ELID) GRINDING

Volume 4, Issue 1, February 2023     |     PP. 41-54      |     PDF (272 K)    |     Pub. Date: October 6, 2019
DOI:    214 Downloads     15989 Views  

Author(s)

Tursunbaev Sarvar Anvarovich, School of Mechanical and Electrical Engineering, Harbin Institute of Technology, China

Abstract
In this article, introduces and reviews abrasive processes assisted by electrolytic in-process dressing (ELID) technique. This in situ dressing method is used for metal-bond wheels and is relatively new. As illustrated by the examples given below, the introduction of this technique has been highly successful when fine grain wheels were efficiently used to obtain very low surface roughness, and when hard ceramics had to be machined using a very small grain cutting depth in order to avoid failure by cracking.The basic system, principles, and characteristics of ELID abrasion mechanisms are introduced first. The success and wide application of ELID principles to ceramic grinding are explained. Fourteen applications of the ELID principle to modern abrasive processes are documented to illustrate the scope of application.

Keywords
Electrolytic in-process dressing (ELID), electrode, grinding abrasive, ceramic materials, biomedical materials.

Cite this paper
Tursunbaev Sarvar Anvarovich, AN ANALYSIS OF ELECTROLYTIC IN-PROCESS DRESSING (ELID) GRINDING , SCIREA Journal of Mechanical Engineering. Volume 4, Issue 1, February 2023 | PP. 41-54.

References

[ 1 ] Ohmori, H., and Nakagawa, T., Mirror surface grinding of silicon wafers with Electrolytic In-process Dressing, Annals of the CIRP, 39(1):329–332 (1990)
[ 2 ] Chen, H., and Li, J. C. M., Anodic Metal Matrix Removal Rate In Electrolytic In-process Dressing I: Two-dimensional Modeling, J. Appl. Phys., 87(6):3151–3158 (2000)
[ 3 ] Chen, H., and Li, J. C. M., Anodic Metal Matrix Removal Rate in Electrolytic In-process Dressing II: Protrusion Effect and Three-dimensional Modeling, J. Appl. Phys., 87(6):3159–3164 (2000)
[ 4 ] Ohmori, H., Takahashi, I., and Bandyopadhyay, B. P., Ultra-Precision Grinding of Structural Ceramics by Electrolytic In-process Dressing (ELID) Grinding, J. Mater. Process Tech., 57:272–277 (1996)
[ 5 ] Bandyopadhyay, B. P., and Ohmori, H., The Effect of ELID Grinding on the Flexural Strength of Silicon Nitride, Int. J. Mach. Tool Mfg., 39:839–853 (1999)
[ 6 ] Zhang, B., Yang, F., Wang, J., Zhu, Z., and Monahan, R., Stock Removal Rate and Work piece Strength in Multi-Pass Grinding of Ceramics, J. Mat. Proc. Tech., 4:178–184 (2000)
[ 7 ] Zhang, C., Kato, T., Li, W., and Ohmori, H., A Comparative Study: Surface Characteristics of CVD-SiC Ground with Cast Iron Bond Diamond Wheel, Int. J. Mach. Tool Mfg., 40:527–537 (2000)
[ 8 ] Zhang, B., and Howes, T. D., Material-removal Mechanisms in Grinding Ceramics, Annals of the CIRP, 43(1):305–308 (1994)
[ 9 ] Nakagawa, T., and Suzuki, K., Highly Efficient Grinding of Ceramics and Hard Metals on Grinding Center, Annals of the CIRP, 35(1):205–210 (1986)
[ 10 ] McGeough, J. A., Principles of Electro-chemical Machining, Chapman and Hall Publ. House, London (1974)
[ 11 ] Ohmori, H., Lin, W., Moryiasu, S., and Yamagata, Y., Advances on Micromechanical Fabrication Techniques: Microspherical Lens Fabrication by Cup Grinding Wheels Applying ELID Grinding, RIKEN Review #34 (Apr. 2001)
[ 12 ] Qian, J., Li, W., and Ohmori, H., Precision Internal Grinding With Metal bonded Diamond Grinding Wheel, J. Mat. Proc. Tech., 105:80–86 (2000)
[ 13 ] Qian, J., Ohmori, H., and Li, W., Internal Mirror Grinding With a Metal/ Metal-Resin Bonded Abrasive Wheel, Int. J. Mach. Tool Mfg., 41:193– 208 (2001)
[ 14 ] Stephenson, D. J., Veselovac, D., Manley, S., and Corbett, J., Ultra-precision Grinding of Hard Steels, J. Int. Soc. Prec. Eng. Nanotech, 25:336–345 (2001)
[ 15 ] ELID Grinding and Polishing ,Handbook of Ceramics Grinding and Polishing (Second Edition), 2015, Pages 326-359 ,Zonghua Xu, Cristian Spanu, Ioan D. Marinescu
[ 16 ] A study on ELID ultra precision grinding of optical glass with acoustic emission , International Journal of Machine Tools and Manufacture, Volume 46, Issue 10, August 2006, Pages 1053-1063 , D. J. Stephenson, X. Sun, C. Zervo
[ 17 ] An ELID-cutting saw,Journal of Materials Processing Technology, Volume 102, Issues 1–3, 15 May 2000, Pages 208-214 ,Hong Chen, Jing Li, Jesse Spence, James C. M Li
[ 18 ] A fundamental study on the mechanism of electrolytic in-process dressing (ELID) grinding International Journal of Machine Tools and Manufacture, Volume 42, Issue 8, June 2002, Pages 935-943H. S. Lim, K. Fathima, A. Senthil Kumar, M. Rahman
[ 19 ] Application of electrolytic in-process dressing (ELID) grinding and chemical mechanical polishing (CMP) process for emerging hard–brittle materials used in light-emitting diodes,Journal of Crystal Growth, Volume 326, Issue 1, 1 July 2011, Pages 140-146Hyunseop Lee, Hiroshi Kasuga, Hitoshi Ohmori, Hojun Lee, Haedo Jeong
[ 20 ] A study on ELID ultra precision grinding of optical glass with acoustic emission, International Journal of Machine Tools and Manufacture, Volume 46, Issue 10, August 2006, Pages 1053-1063D. J. Stephenson, X. Sun, C. Zervos